cone crusher|sell cone crusher|stone crusher|cone crusher manufacturer-zenith company-

The Zenith Cone crusher crushes materials by the working surface between the movable cone and fixed cone. The movable cone is supported by spherical bearing and fixed on an hanging erect shaft which is set in the eccentric sleeve, and the sleeve is set on the stopping and pushing bearing. The movable cone and erect shaft are drived by the eccentric shaft sleeve together. The eccentric shaft sleeve is driven by horizontal shaft and fimbriated gear, and the wheel of the conveyor belt is drived by motor through v-belts.The lower part of vertical shaft is installed in the eccentric sleeve. When the eccentric sleeve rotates, there is a conical surface lined out by the shaft. When the movable cone comes near the fixed cone, rocks are grinded into pieces, when the cone leaves, grinded materials is discharged from the diacharge hole. The fixed cone can be ascended or descended by adjusting setting to adjust the width of discharge hole, consequantly the output size is determined.

The Feature Of Zenith Cone Crusher:

1.Our cone crushers perform well in crushing various kinds of ores and rocks of medium or above medium hardness. The zenith cone crusher has the advantages of stable structure, high efficiency and long lifetime . Because we adopt energy saving technologies, the cone crushers consume less energy compared with other brands. Our particular design ensures continuous operation.

2.Due to easy to operate, our cone crusher can be easily integrated to automation system, as a result the overall efficiency can be increased dramatically.

3.The spring safety system of the cone crusher acts as an overloading protection system that allows metals to pass through the crushing chamber so as not to damage the cone crusher.The safety system of the cone crusher uses dry oil and water as two kinds of sealed formation to make plaster powder and engine oil separated to make sure reliable performance. So the life time is longer, and then the whole cost is reduced.

4.Our cone crusher is suitable to crush medium size, fine and ultrafine powders depending on the different type. Contact information

The Zenith Cone Crusher Paramator:

Type		Outside diameter Of crushing cone (mm)	Max feed size (mm)	The adjusting range of discharger (mm)	Crushing capacity (t/h)	Electric motor power (kw)	Speed of Eccentric shaft (r/min)	weight (T)
PYB	600	600	65	15-25	40	30	356	5
PYD	600	600	35	3-13	12-23	30	356	5.5
PYB	900	900	115	15-30	50-90	55	333	11.2
PYZ			60	5-20	30-65			11.2
PYD			50	3-13	15-50			11.3
PYB	1200	1200	145	20-50	110-168	110	300	24.7
PYZ			100	8-25	42-135			25
PYD			50	3-15	18-105			25.3
PYB	1750	1750	215	25-50	280-480	160	245	50.3
PYZ			185	10-30	115-320			50.3
PYD			85	5-13	75-230			50.2
PYB	2200	2200	300	30-60	59-1000	280-260	220	80
PYZ			230	10-30	200-580			80
PYD			100	5-15	120-340			81.4

Note:

If there is any modification of the zenith cone crusher paramator, all parameter and overall dimension are subject to the operating Instructions.